How to Take Screenshot Without Print Screen on a Windows Computer

It might be possible that you do not have a ‘Print Screen’ key on the keyboard of yours. So you need to bring up any other way to capture the Windows screenshot. We can’t neglect the fact that the standard way of tapping on Print Screen, putting the picture in Paint, is a very slow process as compared to the rest of the ways. To know the best ways of taking a screenshot by not even pressing on Print Screen, read through the blog.

Using Snip as well as Sketch or Snipping Tool

You might be aware that each of the latest version of the Windows device comes up with an in-built screenshot feature known as the Snipping Tool. With the help of it, you shall be able to capture any image of the complete display, single Windows, and square areas.

1. You only need to launch the Start menu.
2. Then, find the snipping for beginning the use of that.
3. For reaching out to it quickly, you do have the option of putting it to the Taskbar.

For the Windows 10 users:

Prefer using the Snip and Sketch utility. For launching it, you need to put the combination of Windows + Shift + S for launching the screenshot wherever you wish.

Installing a Third-Party Screenshot Application

You need to get a good Screenshot application as well as require changing its keyboard shortcut to that you wish to have. This gives you more management power.

Opening the on-screen keyboard

1. Go to the on-screen keyboard by pressing ‘on-screen’ situated in the Start as well as opening the utility. Note that this shall launch a keyboard into a normal application window.
2. Next, press the PrtScn button. It will be situated in the Right-hand part. Note that the device of yours shall behave similarly like you would have tapped on the Print Screen key on the keyboard of yours.

Remapping any other button to Print Screen

Note that there are particular tools that you can use for remapping keys in Windows. For instance, SharpKeys. For using it, the step that should be taken by you is changing the key of the keyboard of yours, which you don’t use. It can be Power or else Medial Play to a makeshift Print Screen button.

Do you prefer ‘Print Screen’ for capturing Screenshots on your device?

Going for any other alternate way is less time-consuming and simpler instead of pasting to the Paint. So try out one of the methods mentioned above and see the difference all by yours.

Ava Williams is a creative person who has been writing blogs and articles about cyber security. She writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. Her articles have been published in many popular e-magazines, blogs and websites.

Source : Take Screenshot Without Print Screen

How to Share Songs in macOS Catalina

Everyone finds media sharing beneficial on their home network, and the best part is that the Apple devices make this a bit easier. Whenever you send any song or any other item, you shall be able to reach out to its iOS devices. For knowing about in a bit depth, go through this blog carefully.

Turn on media sharing for songs as well as video

For doing it in Mac operating system or else the newer one

1. Firstly, go to System Preferences.
2. Then, press on the ‘sharing’ option.
3. After that, turn on Home Sharing as well as authorize that by the Apple ID and password.
4. Next, mention that you need remote plays for updating the play count or not as well as about pictures reaching out to Apple TVs on the given network.
5. Then, press on ‘Options.’
6. After that, give a password so that you can have your library safe from unwanted people.

If you don’t be able to turn on Media Sharing

1. Firstly, launch the song as well as TV applications.
2. Next, go towards the upper side of the display.
3. Then, press on Account.
4. After that, press on Authorization.
5. Next, tap on Deauthorize this computer.
6. Then, press on the Account option.
7. After that, tap on Authorization.
8. Next, tap on Authorize This Computer.
9. Lastly, do a try to share the media library of yours one more time.

Still running Mac operating system Mojave or older

1. Firstly, open iTunes.
2. Then, give some time to it for loading it.
3. Next, on the upper side of the display, you need to press on iTunes.
4. After that, tap on Preferences.
5. Then, go to under the Sharing option.
6. Next, turn on ‘Share my library on my local network.’ Mention that you wish to share all of the things or selectively.
7. Next, set-up the password needs as well as the remote play counts or not.

Accessing shared media by the network

For accessing media of yours from the Mac device having Mac operating system Catalina or else the newer

1. Firstly, launch the Song or TV applications.
2. Then, press on Library.
3. Next, tap on the pull-down arrow after the ‘Library’ situated at the side.
4. After that, select the library from which you want to do streaming.
5. Next, give some time for TV or else Song for updating the present things.
6. Lastly, return to the library of yours. It can be done by pressing the pull-down arrow as well as choosing ‘My Library.’

For accessing media by the iPhone or else iPad

1. Firstly, go to the Song or TV applications on the iPhone or iPad.
2. Then, go to the Library option.
3. After that, press on the ‘Home Sharing.’
4. Next, press the library of yours.
5. Lastly, give some time for the application to get connected.
6. Lastly, play the media of yours.

Ava Williams is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

Source :  Share Songs in macOS Catalina

How to Fix Android File now Transferring to Macbook

If you have earlier installed Android File Transfer Application on your Macbook, then you may view a warning message on your Macbook screen that says your Android phone not connected to the device. There can be numerous reasons as to why this is happening, and we will try to figure them out. Here you can learn how to transfer an Android file into your Macbook. Here are some steps to help you to transfer your Android data into your Macbook device.

First Method: Enable USB Cable instead of USB Debugging

1. Use different USB cable, when you are facing the same issue. 
2. Now attach your Android mobile phone into Macbook through USB data cable.
3. On your Android mobile screen, open Settings.
4. Switch on your USB option and select MTP (Media device) option.

Second Method: Diagnose Macbook

1. You have to assured to use Macbook OS X and Android version 3.0 
2. Reboot your Macbook computer.
3. Open the Android Data Transfer application on your Macbook.

Third Method: Update your Android Mobile Phone

1. You have to upgrade your Android Mobile by completing the orderly Update.
2. Reboot your Android mobile phone and check that it is approved by your Macbook.

Use Android Mobile Assistant

Here is another way to solve your issue using Macbook to fix the Android file transfer issue with Macbook.

There is an Android Assistance Software for Macbook to handle an Android mobile file on your computer. It is easy to transfer your file from Android phones to Macbook PC with the app. You can also backup your data like pictures, contact, message, music and, videos in some moments. You can follow the step to do.

First Method: Download Android Manager and install on Macbook

First, you must have to download the Android Manager into your Macbook and then you have to install it in your MacBook. This software only supported in the current version of the Macbook device for the best performance. If you have installed, then perform these steps.

1. Install the software into your Macbook computer.
2. Launched the Application
3. Here you can see the Application on your Macbook application.
4. Navigate your cursor to Transfer icon
5. Tab the button.

Second Method: Link your Android Phone with Macbook

you can attach your Android mobile phone to your Macbook computer via USB cable. Computer software automatically attached to your phones and display program into your computer screen.

Third Method: Transfer your chosen Folders

Here you can transfer your data from Macbook to an Android mobile phone or vice versa. With using this Application, you can also transfer your picture, documents, contact, videos, music, etc. you can import your files from Macbook to your Android mobile phone or vice versa. Android Assistance helps you to transfer your data from your Macbook to your Android as well as you can restore your backup too. Follow the steps carefully to ensure you get optimum results.

Ava Williams is a Microsoft Office expert and has been working in the technology industry since 2002. As a technical expert, she has written technical blogs, manuals, white papers, and reviews for many websites such as office.com/setup.

Source : Fix Android File to macbook

How To Edit Mac Hosts File On Mac (Mac OS X)

Mac has a small host file that can specify your essential documents to a given IP address. Nowadays, we all are using the internet where we use various of a public and private server to a visual IP address and block sites that are not relevant to us or unused IP addresses. You can not only block these sites but also harmful threats from entering your system via edited host files. Here is the step on how to editing the Mac host.

Edit Your Mac Hosts File With Text Edit

Here are two basic ways to editing the Mac Hosts in the Apple MacOS device. The first one is applied by TextEdit earlier. The Mac host file is in a simple form of the document. Yet you can’t open your file easily until the Protected place of the system. Here you need to copy the unsafe files area on the desktop

1. Edit it.
2. Copy the selected files.
3. Copy back the files.

First, you have to find Mac hosts file, then follow the command by pressing Spacebar+finder, then do these listed steps.

1. Choose the Go Menu.
2. Click on GO TO Folder.
3. Here input /private/etc/hosts.
4. Tap on Return.
5. Under windows will be open here and show Your selected Mac’s hosts file, Tap on finder window and scroll down to the desktop.
6. Here double click to open your file which displayed on your desktop screen.

How to Block IP Addresses

In the default option, there is a number of relevant documents that contain numerous lines.

Here all the lines that indicate Hashtag commented and not consider by Mac hosts file as well as etc. file.  You can make some notes that can help you in the future when you need to open these files.

Here every line of the text has been ignored by your PC. This is an excellent method to describe your notes and making notes. It contains an IP address that values your broadcast host and localhost.

Always remember when you are using other hosting websites that are not relevant can test these websites by using a developed web browser. You can also block migrates websites and access to a specific site.

Here are some examples that can help you to exactly what you can do into your device that entirely works for you. Or you can clock some websites who disturb you at the time of working. For example, you want to block facebook.com. To 1.1.1.1.

After that, whenever you try to input a valid IP address like www.facebook.com into your Macbook, its web browser will be failed to open that page, now you can work with your computer without any disturbance.

How to Reroute Web Addresses

Another way, when you input the IP address of an official website instead of 1.1.1.1., it can direct you to Facebook without choosing any sites.

To investigating a website’s IP address, you wish to use dig command that comes to standard with MacOS. We also open these sites by running the command on URL, that can return to your IP address.

Examples:

$ dig www.techjunkie.com +short/104.25.27.105

(Here you have informed about +shorts option)

$ sudo killall -HUP mDNSResponder

(Here you can enter required passwords)

$ sudo killall -HUP mDNSResponder; say DNS cache has been flushed

Ava Williams is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, cryptography, malware, social engineering, internet and new media. He writes for Mcafee products at mcafee.com/activate.

Source : Edit Mac Hosts File On Mac (Mac OSX)

How to Set Password Expiration Date for Local Microsoft Account

We all have this habit of using a similar password for a long time, but it is unsafe, mostly when it is used in more than one place. It is probable that in security infringe; the password can be open for all. There are different ways to set the expiry date for passwords for local Microsoft accounts. If you are using the account of Microsoft in Windows 10, then it becomes more serious that you need to change it repeatedly. When you set the expiry date of the password, you can select from the Windows that offers for the local account or set via net command. Read the blog and follow the instructions to set the Password expiration date for the local and Microsoft accounts.

How to Set the Expiration Date for Microsoft Account

If you wish to set the expiration date for Microsoft account, then pursue the given instructions:

1. Navigate to the Security menu of Microsoft Account.
2. Tap on the Change my password link below the Password security option.
3. Insert the previous password and then type the new one twice.
4. Checkbox, which asks Make me change the password after every 72 days.

The demerit of this process is that you have to change the old password with the one you have not repeated for not more than 3 times in the past. You must know that it is dissimilar from the Windows Hello or the PIN that you use on the Windows 10 PC.

How to Set Expiry Date of Password for Local Account

As it is probable to make the account without the password in Windows 10, but it will surely not a great idea. If you are an admin user of the PC, ensure that every user modifies their passwords repeatedly. There are 2 different ways of it, and this will influence users to modify their new passwords. This is set as default for 42 days.

Via User Accounts Interface

If you want to User Accounts interface, then abide by the given steps:

1. Insert the lusrmgr.msc in the Run box and then click the Enter.
2. It will launch the Groups Editor and Local Users.
3. Find the user for which you need to change password expiry below the Users folder.
4. Tap twice to launch the user properties option.
5. Untick the box that asks Password never expires.
6. Tap on the OK option to finish the procedure.

There is the well known WMIC command, but it shows as it is not working on Windows 10 if the users use the command without the ‘where the name’ then it will set the expiry date of the password for every account with the system account.

Command-Line Option to Set the Expiry Date

When it is completed, then if you need to set the exact expiry date, you have to use the “Net accounts” command.

Launch the PowerShell with the Admin Privileges and perform net command accounts. If you need to set any specific expiry date, then you want to analyze numbers in days. If you have set the date on 30, then you have to modify the password every month. If you want to influence anyone to change your password quickly, then you can use the maxpwage:1.

Via Group Policy to Change the Expiry Dates of Password

If you want to change the expiry dates of password via Group Policy, then you can follow the provided steps:

1. Launch the Group Policy Editor by inserting gpedit.msc in Run box and then click the Enter button.
2. Go to the Computer Configuration option.
3. Select the Windows Settings option.
4. Tap on Security Settings.
5. Choose the Security Settings option.
6. Hit Account Policies.
7. Tap on the Password Policy, and press the Maximum Password age option.
8. Here you may change from 42 to any date you want. The limit is in between 1-999.

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as mcafee.com/activate.

Source : Set Password Expiration Date

How to Fix “Service Registration Is Corrupt or Missing” Error on Windows 10

Service registration is corrupt or missing error can be encountered when running the troubleshooter of Windows update. Sometimes troubleshooter handles fixing the problems automatically; however, it is obvious that the act from the users requires this. Windows 10 like any other software, is always coming up with the latest updates, and it depends on the users that how they handle it. Usually, all update is distributed routinely, though it can be disabled. Users who face this error that stops them from updating their system are most prone to malware attack and may not receive the latest features, hope the bug fixes along with others. If you are facing trouble in updating, then this post might be helpful. Read through the blog and follow the instructions to fix the “Service registration is corrupt or missing” error on Windows 10.

Run the System File Checker

It is the immense built-in tool that may check the reliability of system data of Windows. If any files are corrupted, then it will fix repeatedly. To run an SFC scan, users have to launch Command Prompt with the Administrator’s rights.

If you want to run the system file checker, then you can follow the provided steps:

1. Insert in cmd in the search.
2. Right-click the Command Prompt from the search result.
3. Choose the Run as administrator option.
4. Insert the given command in a window and click Enter:

sfc /scannow

• If there will be any reliability error exist, Windows will fix it automatically and inform you about it.

Reset Windows Settings Using Command Prompt

This will help you to fix the “Service registration is corrupt or missing,” as this has helped many users. Like the previous process, we applied in a fix. You may have to insert it again, the command prompt on it.

If you wish to reset Windows settings, then pursue the given instructions:

1. Access it with Administrative rights.
2. Insert the given command and click Enter after every command:
3. net stop wuauserv
4. net stop cryptSvc
5. net stop bits
6. net stop msiserver
7. ren C:\\Windows\\SoftwareDistribution SoftwareDistribution.old
8. ren C:\\Windows\\System32\\catroot2 catroot2.old
9. net start wuauserv
10. net start cryptSvc
11. net start bits
12. net start msiserver
13. Close it and reboot the system.
14. Then aim to update it again.

Ensure That Update Service Are Running

Sometimes users cannot update the system due to the Windows Update service may not be running.

If you want to Ensure that update service are running, then abide by the given steps:

1. Insert the services.msc in search and click Enter.
2. Arrange service record by Name in a new window.
3. Scroll down and find the WindowsUpdate service.
4. Right-click and then choose the Properties option.
5. Ensure that choice is put to Automatic below Startup type section in the General button.
6. When chosen, tap on the Start below the Service Status.
7. Hit the Apply option.

Eradicate the Registry Value

Follow the provided instructions to eradicate the registry value:

1. To begin, make the backup of Registry. For this reason, click on Windows key + R, insert regedit.
2. Tap Enter.
3. Hit on the File at the top-left and choose the Export option.
4. Choose a place where you need to store backup
5. Insert a name for a backup in the File Name box and hit Save option.
6. Now you have to clear the value ThresholdOptedIn.
7. visit to the HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\WindowsSelfHost\\Applicability
8. Locate ThresholdOptedIn value at the right window. It is there, then taps on it and clear it.

Reset the cache of Microsoft Store

1. Insert the WSReset.exe in search and click the Enter.
2. Then the Window will prompt that displays briefly – and wait until it disappears.
3. This act will reset the Microsoft Store cache.

Ava Williams is a creative person who has been writing blogs and articles about cyber security. She writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. Her articles have been published in many popular e-magazines, blogs and websites.

Source : Error on Windows 10

How to Activate a Used iPhone?

Purchasing any used iPhone might create several issues like inability of activating the gadget on the carrier’s network. It is due to iPhone needs someone else’s Apple account, and it shall not get activated without it. If you are facing a similar situation, then we will help you out.

Want to Know about Activation Lock?

It can be possible that a user may not be able to activate the iPhone due to the feature Find My iPhone service known as Activation Lock of Apple. An Activation Lock is a way of security which Apple included for dealing with the stealing of the iPhone. Earlier before the introduction of Activation Lock, if any thieve did steal any iPhone was not caught and sold it without difficulty. Luckily, the presence of Activation Lock has changed this thing.

The servers shall only activate the iPhone if the correct Apple ID has been put on the iPhone.

Deleting Activation Lock with iCloud

1. Firstly, visit iCloud.com on whichever device you want.

Remember: If you are visiting iCloud.com on the iOS device and have got ‘Find My iPhone’ installed, then you shall be able to view an option of ‘Open Find My iPhone’. Press on that for moving further.

• Log-in by using the Apple ID, which helped for activating the iPhone.
• Then, press on Find iPhone.
• After that, tap on All Devices.
• Next, tap on the iPhone which has been sold to you.
• After that, tap on the ‘i’ symbol for viewing the information.
• Then, tap on Remove from Account.
• Note that the present owner requires having the previous device owner Erase the phone first of all.
• Lastly, you need to restart your iPhone.

Erasing an iPhone with iCloud

1. Firstly, visit iCloud.com/#find.
2. Then, log-in by using the Apple ID that the previous owner used on the device.
3. Next, tap on All Devices.
4. After that, choose the iPhone, which the previous owner sold you.
5. Then, tap on Erase iPhone.
6. Whenever the iPhone is cleared, tap on Remove from Account.
7. Next, you need to restart your iPhone.

Using the ‘Find My iPhone’ application

1. Firstly, go to Find My iPhone application.
2. Then, log in by using the Apple ID the previous user used.
3. Next, choose the device that has been sold to you.
4. After that, click on Erase iPhone option.
5. Then, click on Erase iPhone.
6. Next, put the Apple ID of theirs.
7. After that, click on the Erase option.
8. Then, press on Remove from Account option.
9. Lastly, you need to restart the iPhone device.

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as mcafee.com/activate.

Source : iPhone