How to Fix Ethernet Connection Problems in Windows 10?

 If your Wi-Fi is working but the wired ethernet connection is not, then you should disable the WiFi. When Windows 10 can access both the Wi-Fi and the ethernet connection, then it prioritizes the latter.  So, if you turn off the wi-fi, you can find out if the ethernet connection is working or not. To fix ethernet connection issues, follow the solutions mentioned below.

Update the Drivers Manually

You should pursue these steps provided below:

1. Navigate to the Windows icon, and right-click on it, then choose the Device Manager option.
2. After that, select the list of Network adapters and expand it, then check if any problems are using the devices.
3. Then reach the Ethernet card and identify it.
4. Later right-click on it, and choose the Properties option.
5. Once you reach the screen of Device status, it may say that the device is operating correctly.
6. Now, in case the icon of the Ethernet controller has an exclamation point or a question mark, then install the right driver for it again.

Ensure that the Connection is Turned on

You should pursue these steps provided below:

1. Go to the Windows menu, and right-click on it, then choose the Network connections.
2. Now, right-click on it and choose the Enable option.

Check the Connection Details

You should pursue these steps provided below:

1. Reach the connection of Ethernet and right-click on it, then choose the Properties option.
2. Once you reach the screen of ‘Ethernet Properties’, select the option of ‘Internet Protocol Version 4 (TCP/IPv4)’ then twice click on it.
3. Turn on these options: ‘Obtain DNS server address automatically’ and ‘Obtain an IP address automatically.’

Launch the Internet Connection Troubleshooter

You should pursue these steps provided below:

1. Go to  the Search section.
2. Thereafter, type and enter ‘Update and Security’.
3. You have to choose the ‘Troubleshooter’ option.
4. Now, choose and open the ‘Internet connection troubleshooter’ option.
5. Check whether the connection of Ethernet is available.
6. Finally, reboot the system and check once again.

Roll Back the Network Adapter Driver

You should pursue these steps provided below:

1. Open the Device Manager.
2. Then select the Network adapters and choose the ‘network adapter’ option.
3. Later, right-click on it then choose the Properties.
4. Once you reach the Properties screen, choose the tab of Driver, and select the ‘Roll Back Driver’ option.
5. Pursue the on-screen instructions to install an earlier version of the driver.
6. In case the option is unavailable, that means there is no driver to roll back to.

Disable the Firewall

You should pursue these steps provided below:

1. Launch the Windows Firewall.
2. Disable it.
3. Now, check the Ethernet connection once again.

Reset the Network

You should pursue these steps provided below:

1. Reach the Settings screen, choose the ‘Network & Internet’ option, and then select the Status option.
2. Then find the option of ‘Network reset.’
3. Now, click on the button of ‘Reset now’ and hit the Yes button.

By following the troubleshooting tips mentioned above, you will be able to fix the ethernet connection issues on your Windows 10 device.

JEANNE E. WINFIELD arrived on the cyber security scene in the early 2000s when virus and malware were still new and slowly evolving. Her longtime affair with writing with an interest in the cybersecurity industry, combined with her IT degree, has contributed to experience several aspects of security suite industry such as blogging at mcafee.com/activate.

  Source : How to Fix Ethernet Connection Problems in Windows 10

 

How to Fix Mic Not Working In Windows 10 Xbox Application

The Xbox application for Windows 10 is an all-in-one gaming hub. However, it sometimes does not work great while streaming or playing casual games. One of the significant issues with this application is mic issue. Several users reported that they were unable to get mic to work in the Xbox application. In this article, we will show you how you can fix this issue.

Clear Applications Cache

Here are the steps to follow:

1. Tap the Windows + I button on your keyboard to launch the settings application on your Windows 10 operating system.
2. Select “Application” in the settings button.
3. Enable the “Xbox” application and then launch the “Advanced settings.”
4. Bottom down and then click the “Reset” button.

Check Application’s Permission

To use mic with any application on Windows 10 system, you need application permission.

To do so, first, you need to confirm your system has global permission to access mic. Then you need to allow the Xbox application to use mic in the application settings menu.

Here are the steps to follow:

1. Tap the Windows + I button on your keyboard to launch the settings application on your Windows 10 operating system.
2. Select “Privacy” in the settings tab.
3. Click “Microphone” in the left side pane.
4. In the “Choose which apps can access your microphone,” you need to toggle on the “Xbox” application.

Change Default Output Format

Here are the steps to follow:

1. Right-tap on the “Volume logo” that appears on the notification area and launch “Sounds.”
2. Select the “Recording” button.
3. Right-tap on the “default recording device” and then click “Properties.”
4. Select “Advance.”
5. Select “Studio Quality or DVD” under the default format in the dropdown menu and then save your changes.

Temporarily Turn Off Firewall and Antivirus

One of the possible reasons that Xbox applications cannot access mic may be because of firewall-imposed limitations. Sometimes third-party antivirus programs block some applications from accessing the computer peripherals.

 To fix this issue first, you need to disable your third-party antivirus program temporarily.

Install Teredo Adapter

Here are the steps to follow:

1. Right-tap on the “Start” button and then launch the “Device Manager.”
2. Tap on the “View” in the dropdown menu and then select the “Show hidden devices” button.
3. Enable “Network” adapters and then find “Teredo Tunneling Pseudo-Interface.”
4. If it is not available there, then tap on action in the dropdown menu and then select “Add legacy hardware.”
5. Click “next.”
6. Select “Install the hardware that I manually select from the list (Advanced)” button and then select “Next.”
7. Select “Network adapters” in the list and then tap on Next.
8. Click “Microsoft.”
9. Select “Microsoft Teredo Tunneling Adapter” in the dropdown menu and then install it.

Check Audio Input Driver

Here are the steps to follow:

1. Right-tap on the “Start” button and then launch the “Device manager.”
2. Enable “Audio inputs and outputs” option.
3. Right-tap on each entry and then “uninstall the device.”
4. Now reboot your computer and remember that “Mic plugged in.”
5. Now you need to wait until the driver is installed.

Alex Clara is a creative person who has been writing blogs and articles about cyber security. She writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. Her articles have been published in many popular e-magazines, blogs and websites.

    Source : Windows 10 

How To Fix Network File Sharing Problem in Windows 10

Several Windows users complain about the issue that prevents them from sharing network file on their Windows 10 PC or laptops. According to reports, the problem mainly occurs in Windows 10 version and prevents users from sharing network file on their PC. If you are among the users facing the same issue then you have come to the right place. Here are some of the best and most effective ways to fix this problem in no time.

By ensuring that certain services are working properly by following the steps listed below;

• Click on the Run prompt box.
• Press on the Windows and R keys together.
• These keys are given on the computer keyboard.
• Enter “services.msc” in a new box.
• Choose the OK button.
• This button opens the Services menu.
• Additionally, you have to visit the Control Panel.
• For this procedure, find the Control Panel in the Start option.
• Or, find it through the Start option search bar.
• Set the “View by” option, and you can go through this procedure once the Control Panel gets open.
• This option is provided at the upper right-hand of the menu.
• Set the View by option into the Large icons.
• Slide down till the Administrative Tools appears on the desktop.
• Press on Administrative tools.
• Find the Services shortcut option.
• This option is given at the upper right-hand side of the screen.
• Press and launch it.
• Find the Function Discovery Provider Host option.
• Or, find the Function Discovery Resource Publication services.
• Find it on the menu list.
• Right-click on every option.
• Choose Properties.
• The pop-up menu will display on the screen.
• In case you have begun the services already, prevent it by pressing on the Stop option.
• This option is given in the center of the screen.
• Change the Startup type menu into the Automatic menu.
• Verify the prompt box that will show when adjusting the startup type.
• Press on the Start option.
• This option is provided in the center of the window.
• You will face the below-mentioned error while pressing on the Start menu:

Windows could not start the service on Local Computer. Error 1079: The account specified for this service differs from the account specified for other services running in the same process.

In case this is occurring, follow the steps listed below to resolve it:

• Launch the service properties menu.
• Click on the Log On option.
• Press on the Browse option.
• Enter the name of the account.
• You need to go below the “Enter the object name to select” checkbox.
• Choose the Check Names option.
• Let the name to show up on the screen.
• Press on the OK button.
• Enter the password in the Password checkbox.
• It might be possible that the network file sharing problem in Windows 10 is fixed or not.

By allowing ownership and permissions for the problematic folders

• Click on the Libraries entry option.
• Click on the folder saved on your PC.
• Press on This PC.
• This is given at the left-hand corner of the window.
• Click on the folder which is occurring this issue.
• You have to follow the same steps for other folders also.
• Allow ownership for the folder.
• You have to right-click on the folder.
• Press on the Properties option.
• 10  Press on Security.
• Press on Advanced.
• The Advanced Security Settings menu on the desktop.
• Press on Change URL.
• This is given near to the Owner title.
• On the screen, you will get the Select User or Group menu.
• Choose the user account using the Advanced option.
• Enter the user account indicating ‘Enter the object name to select.’
• Press on the OK button.

Robert Hunt is a creative person who has been writing blogs and articles about cyber security. He writes about the latest updates regarding McAfee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.

Source : File Sharing Problem in Windows 10

How to Fix “System Battery Voltage is Low” Error in Windows 10

In the middle of the restarting process, sometimes we face multiple errors. One such error is “System Battery Voltage is Low.” There are various options of tech experts about this error, and the possible reason behind this error is the hardware issue related to BIOS and your Operating System. Generally, when we reboot the device, the BIOS runs in the background system of the device, and it works as an interfacing agent between the start-up programs and the device’s Windows system.

The error related to battery voltage is related to the battery placed inside the motherboard of the device, and sometimes, it needs to replace. This error issue arises on the system when we want to boot it, and in the meantime, it fails to communicate with the integration of BIOS and OS.

Pursue these guidelines to know how to troubleshoot these issues occurs on Windows 10:

Reasons for Arising “System Battery Voltage is Low.” 

It’s mainly the BIOS error that holds a battery for running and executing a program with the Operating System. Some say that it’s a hardware issue, but for those, it might be the issue related to OS and defected drivers or malicious programs.  The Boot system communicates with the operating system to launch the application smoothly on Windows 10.  Once the BIOS system fails to run properly, then you may face various errors on your device.

The Battery voltage error low error is displayed by a specific interface that indicates a problem with your hardware tool or equipment connected to the motherboard.

Sometimes, the main culprit behind this issue is the hardware issue. If the hardware regularly fails to function properly with BIOS, then it needs to be replaced, you have to contact with your product service provider for the same.

Resetting and Updating BIOS

Pursue these guidelines to know the precise and easy way to troubleshoot these instructions before replacing your hardware or contacting any expert:

• Check whether you are able to access the functions of BIOS or not. If yes, then you can fix this issue by resetting BIOS. This process will also eradicate the malfunctioning of your device or hardware.
• First of all, navigate to BIOS and check for the entry section that is “Default Option.” Launch it and tap the option “Reset to Default” or “Factory Default.”
• Then, you need to authenticate the confirm prompt by hitting the Yes tab.
• After that, reboot the device to save your modifications.

Note: Users can update the BIOS in two different ways:

• Automatic procedure: If your device motherboard holds a special option for the BIOS upgrade.
• Manual procedure: Visit the manufacturer site and then install the BIOS update in a manual way.

Setting Up Time and Date in BIOS Section

In some cases, the Battery Voltage error is also caused due to mismatching of date and time in the section of BIOS to run the device functionally well. If it is found mismatched, then it is directed to set up correctly. You have to check that the BIOS is accessible properly. If the time and date are not set properly, then it will restrict your account to launch and to access system programs also.

Checking Integrity of Microsoft

Before replacing BIOS battery components and contacting Microsoft support center, you need to check every section of the motherboard and cords.

Check the components and the USB pins and USB ports properly and make sure that all the functions are properly configured. If not, try to configure the same with updated setup operations.  To check all the components of the motherboard, you will need to disassemble the system and be very careful while fixing any hardware issues.

Checking Regulators

If your system’s motherboard regulators are not working as per schedule, then it directly affects your motherboard as it won’t work properly.  Thus, it further attacks the power system of voltage.

Check that the system is facing a power leak from the regulator. If yes, then your device might face low power issues on Windows 10.

Replacing BIOS Battery

In case you are still facing BIOS battery issues, then check that the battery’s health is perfect for transmitting power to the BIOS and other hardware equipment. To do so, you have to disassemble your system and then check for any error that causing the issue. Check the small pill connected to your motherboard.

There is a battery attached to the motherboard check that the battery transmits the voltage range of 3.2 to 3.3. In case the transmitting battery voltage is less than 2.8 volts, then the regulator and the battery flashes error code on your device. In this case, you must need to change the battery. For detaching the battery from your device, pursue these guidelines:

• At the start, turn Off everything and detach the power cord from your device.
• Next, unbox the casing of your CPU and search for the battery in the central portion of your motherboard. 
• You have to eject the protective cover and then remove the battery from the panel.
• Now, place and set up a new battery and make sure that it is placed correctly in this socket.
• In case you are still facing low battery or voltage power issues on your device, then it is recommended to take it to the service center. You can also call the product service technician at your location to serve you the best.

Ava Williams is a creative person who has been writing blogs and articles about cyber security. She writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. Her articles have been published in many popular e-magazines, blogs and websites.

Source : Windows 10

How to Set Up a VPN on Windows 10

VPN aka Virtual Private Network protects your system and makes it secure to work on. It is useful for companies’ internet network. With VPN, companies can secure their private information. It also protects their secured data from various malicious sites and viruses and even unknown persons from misusing it.

Here is how to set up the VPN for your Windows 10 system through a series of important and easy to use steps:

Setting Up a VPN on Win- 10 Using a Third Party VPN Software

First of all, you have to select a VPN service for securing your computer running on Windows10. Then follow these steps:

1. You should download any third-party Internet access VPN service such as “Private Internet Access.” After paying its due charge according to your subscription plan, you may download it as you wish.
2. Then launch the website of Private Internet Access from where you bought the VPN Software. Now the installer will start to download through the web browser.
3. After that, you have to select the option that says “Save As.” Hit the tab to save the installer to the home screen of your system. It becomes easier to download the VPN through Private Internet Access.

Downloading VPN Software

1. After finishing the process of installation for “Private Internet Access.” Right-click from the mouse and hit the “Run as administrator” option. After a while, you will see the DOS (command prompt) window appear on your computer screen. It will make all the required changes to the system to run the VPN software on your device.
2. Now, tap on the “Install” tab in order to confirm the permission. It will show up inside a pop-out box.
3. Next, modify your internet connection type to TCP. 
4. Then hit the “Private Internet Access” symbol and perform the appropriate selection to do your desired action.

Setting up the VPN through the Window’s Built-in Feature

In case you don’t wish to take a paid VPN subscription, you may use its free service, which is the built-in feature provided by Windows 10. 

For enabling this great feature, your system will need to configure its functions and OS. It will take a couple of minutes.

Follow the offered steps to configure it:

1. First of all, hit the “Windows’ icon located inside your Windows 10 taskbar.
2. After that, hit the “Settings” icon here. It resembles a gear-shaped logo.
3. Once the Windows Settings page displays on your Window, hit the “Network and Internet” option here.
4. Now look for the VPN on the left-hand side section.
5. Click on it to open it.
6. After that, a particular VPN section will appear on your screen. Tap the “+” signed icon saying, “Add a VPN connection.”
7. Next, you have to tap the option that reads “Windows (built-in)” as a mode of your Virtual Private Network (VPN) provider. It will be inside the pull-drop menu.
8. Then name your VPN connection so that you can call it whenever you need an internet connection.
9. Now, the address of your connection server will be placed in the next field.
10. After that, you have to select the “PPTP” option.
11. Now, provide your username and a secured passcode as a log in information. Now, type your passcode, followed by your username to sign in to your account.
12. Finally, hit the “Save” tab located at the lowermost portion of your VPN set up page.
13. The VPN will now display inside the VPN listing. If you wish to start your VPN connection, then you have to tap VPN from the list and then chose the “Connect” tab.

Ava Williams is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

   Source :  Windows 10

How to Reverse the Scrolling Direction in Windows 10

The touchpad and mouse are important input devices on Windows 10. If you are using the touchpad with the laptop or the mouse with the computer, then you can reverse the scrolling direction through the Settings tab. You can also customize the Registry as per your wish. If you want to do it, then follow the instructions mentioned below.

Here’s how to reverse the scrolling direction in Windows 10

·        Editing the registry to reverse the scrolling direction

1. Firstly, go to the Device Manager menu.
2. Click on the Cortana option.
3. Type the Device Manager option.
4. Choose the Device Manager option.
5. It will launch a new window.
6. Choose the Mice and other pointing devices option.
7. Click twice on the mouse.
8. Press on the Details option.
9. It includes the pull-down list.
10. Choose the Device instance path option.
11. It is located in the pull-down list.
12. You need to right-click on the value.
13. It is given in the Value section.
14. Choose the Copy option.
15. Click on the OK button.
16. Exit from the Device Manager menu.
17. Go to the Notepad.
18. Start pasting the VID ID in the Notepad with the Control and V keys together.
19. Click on the Windows and R keys together.
20. It will launch the Run prompt box.
21. Type ‘regedit’ in the Run prompt box.
22. It will launch the Registry Editor menu.
23. Click on the registry location, which is mentioned below:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HID

• Press on the key which is same as the VID ID given in the Notepad.
• Choose the Device Parameters button, which includes FlipFlopWheel DWORD.
• Click twice on the FlipFlopWheel option.
• It will launch the Edit DWORD menu.
• Type ‘1″ in the provided box.
• Click on the OK button.
• Exit from the Registry Editor menu.
• Type the 0 in the Value data checkbox.

·        Settings up the AutoHotkey Script

1. Click on the Cortana option.
2. Type ‘Notepad’ in the text field.
3. Choose to launch the Notepad.
4. Type the script in Notepad.
5. Start copying and pasting the script in the Notepad:WheelUp::

Send {WheelDown}

Return

WheelDown::

Send {WheelUp}

Return

• Press on the File option.
• Click on the Save as an option.
• It will launch the Save as menu.
• Choose All Files option.
• 1It is located in the Save as type option given in the pull-down list.
• Type the name of the file.
• You need to include .ahk at the bottom of it.
• Choose the save option.
• You need to add the AutoHotkey script symbol to the screen.
• Exit from the Notepad window.
• Click twice on the AutoHotkey script shortcut on your screen.
• Press on the Start menu.
• Move the mouse wheel in the upward direction.
• You need to do this procedure to go down to the menu list.
• To exit from the script, you need to right-click on the toolbar.
• Choose the Task Manager menu.
• Choose the AutoHotkey Unicode option.
• It is located in the Processes menu.
• Click on the End task option.

Franklin Patrick is a creative person who has been writing blogs and articles about cyber security. He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.

Source : Windows 10

How to Change Printer Name in Windows 10

Are you finding it hard to remember the default printer name? Well, you can easily change the printer name to make it more descriptive or personalized. Follow the steps given below and rename your printer in Windows 10.

Here’s how to change printer name in Windows 10 through the settings app

•    You need to left-click on the Start option on Windows 10.

•    Press on the Settings symbol by going to the Start menu.

•    Or, right-click on the Start symbol.

•    After that, choose the Settings option by going to the start menu to get the same result.

•    Click on the Windows and L keys together so that you can directly go to the Settings option.

•    Select the Devices option located in the Settings menu.

•    Go to the Printers and Scanners option situated on the Devices menu.

•    Now, you will get the menu list of all the printers and scanners located on the right-hand side which are already installed on the system.

•    Go through the menu list showing of the printers and scanners and after that press on any program of which you wish to change the name.

•    Press on the Manage option.

•    Choose the Printer properties option located on the left-hand corner of the menu list.

•     Go to the General option.

•    You will get an edit box which shows the printer name.

•    Click within the edit box, remove the printer name and select any name to change printer name in Windows 10.

•    After choosing any name, you need to press on the OK option located at the end of the screen.

•    Now, this procedure has change printer name in Windows 10.

Go through the steps to change printer name in Windows 10 through the control panel

•    Go to the Control Panel application by entering the Control Panel into the text field given on the toolbar and choosing the option given on the search results.

•    In case the View by option is changed into Category below the “Hardware and Sound” column, press on the View devices and printers link.

•    Now, you will get the more clear display of the printers and scanners in the Control Panel window.

•    You need to find the printer name which you have changes in Control Panel window and after that, right click on the printer name.

•    Press on the Printer properties option.

•    Open the General menu.

•    Go through the checkbox, which shows the printer name.

•    Press inside of the checkbox, remove the current Printer name and change printer name in Windows 10 by entering a new name.

•    After that. Press on the OK button.

Franklin Patrick is a creative person who has been writing blogs and articles about cyber security. He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.

         Source: Windows 10

How to fix IP address conflict error in Windows 10

Does your Windows 10 computer gets disconnected from the internet and show an error message “Windows has detected an IP address conflict”? This mostly happens when another system also assigned the same IP address as yours. The issue occurs when the router gives the same IP address to multiple computers, sometimes it also occurs even with one computer in a network. The error is quite common and can be solved easily. Here are some effective solutions to fix this error.

Fixes to solve IP address conflict error in Windows 10:

Sometimes because of temporary glitch router fails to assign the right IP address to your system. And this results in IP address conflict error, at this time restarting your router modem will fix the problem. More fixes you can try,

•    Configure your network adapter.

•    Reset IP/TCP configuration.

•    Troubleshoot network adapter.

•    Upgrade network adapter drivers.

Steps to configure your network adapter:

1.    Launch the ‘Run command’ (Win + R).

2.    Type ‘ncpa.cpl’ in the run command field.

3.    And click ‘OK.’

4.    You’ll see network connection window on the screen.

5.    Find your active network adapter and right click on it.

6.    Select ‘Properties’.

7.    Click ‘Internet Protocol Version 4 (TCP/IPv4)’ to select.

8.    And click ‘Properties.’

9.    Click the mark the radio button of “Obtain an IP address automatically.”

10.    Then select “Obtain DNS server address automatically.”

11.    Click “OK” to save changes.

12.    Now, restart your PC.

Steps to reset TCP/IP configuration:

Flushing DNS cache and renewing the IP address will solve most of the network and internet related problems. Here is the command for resetting TCP/IP configuration completely.

1.    Open search and find the command prompt.

2.    Right click on command prompt.

3.    And click ‘Run as administrator.’

4.    Now, perform the command:

“netsh Winsock reset”

“netsh int IP reset c:resetlog. txt”

5.    Now use the below command to reset network configuration:

“Ipconfig/release”

“ipconfig/renew”

“ipconfig/flushdns”

6.    After completing, restart your PC.

How to troubleshoot network adapter

If the program is not fixed yet, start troubleshooting network adapter. Running troubleshooter will automatically search for the trouble and fix it. Here is how to run troubleshooter for the network adapter.

1.    Open ‘settings’ (Win + I).

2.    Settings app will open.

3.    Click on ‘Update and security.’

4.    Click ‘Troubleshoot.’

5.    Select ‘network adapter’ from the right side.

6.    Then click ‘Run the troubleshooter.’

7.    Wait for the troubleshooter to detect and fix the problem.

8.    Once the process finishes, restart your PC.

Disabling IPv6 also fix the IP address conflict error, you can also try it on your Windows 10 computer.

Steps to disable IPv6 in Windows 10:

1.    Launch the ‘Run command’ (Win + R).

2.    Type ‘ncpa.cpl’ in the run command field.

3.    And click ‘OK.’

4.    Click and uncheck ‘Internet protocol version 6 (TCP/IPv6)’.

5.    Click “OK” to save changes.

6.    Restart your PC.

How to upgrade network adapter drivers

Upgrading drivers will fix most of the problems if still, you’re unable to connect to internet then update your network adapter drivers.

Steps to update drivers:

1.    Press ‘Win + X’ button.

2.    Click ‘Device manager’.

3.    Look for the network adapter’s installed driver.

4.    Then right click on the installed driver and select ‘Update driver.’

5.    Select ‘search driver software automatically’.

6.    Wait, it will update the driver, if available.

7.    After completing, restart your PC.

That’s it! Use the solution one by one and check if it will fix the problem.

John Perley is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, John has written technical blogs, manuals, white papers, and reviews for many websites such as office.com/setup.

source : windows 10