How to Fix Ethernet Connection Problems in Windows 10?

 If your Wi-Fi is working but the wired ethernet connection is not, then you should disable the WiFi. When Windows 10 can access both the Wi-Fi and the ethernet connection, then it prioritizes the latter.  So, if you turn off the wi-fi, you can find out if the ethernet connection is working or not. To fix ethernet connection issues, follow the solutions mentioned below.

Update the Drivers Manually

You should pursue these steps provided below:

1. Navigate to the Windows icon, and right-click on it, then choose the Device Manager option.
2. After that, select the list of Network adapters and expand it, then check if any problems are using the devices.
3. Then reach the Ethernet card and identify it.
4. Later right-click on it, and choose the Properties option.
5. Once you reach the screen of Device status, it may say that the device is operating correctly.
6. Now, in case the icon of the Ethernet controller has an exclamation point or a question mark, then install the right driver for it again.

Ensure that the Connection is Turned on

You should pursue these steps provided below:

1. Go to the Windows menu, and right-click on it, then choose the Network connections.
2. Now, right-click on it and choose the Enable option.

Check the Connection Details

You should pursue these steps provided below:

1. Reach the connection of Ethernet and right-click on it, then choose the Properties option.
2. Once you reach the screen of ‘Ethernet Properties’, select the option of ‘Internet Protocol Version 4 (TCP/IPv4)’ then twice click on it.
3. Turn on these options: ‘Obtain DNS server address automatically’ and ‘Obtain an IP address automatically.’

Launch the Internet Connection Troubleshooter

You should pursue these steps provided below:

1. Go to  the Search section.
2. Thereafter, type and enter ‘Update and Security’.
3. You have to choose the ‘Troubleshooter’ option.
4. Now, choose and open the ‘Internet connection troubleshooter’ option.
5. Check whether the connection of Ethernet is available.
6. Finally, reboot the system and check once again.

Roll Back the Network Adapter Driver

You should pursue these steps provided below:

1. Open the Device Manager.
2. Then select the Network adapters and choose the ‘network adapter’ option.
3. Later, right-click on it then choose the Properties.
4. Once you reach the Properties screen, choose the tab of Driver, and select the ‘Roll Back Driver’ option.
5. Pursue the on-screen instructions to install an earlier version of the driver.
6. In case the option is unavailable, that means there is no driver to roll back to.

Disable the Firewall

You should pursue these steps provided below:

1. Launch the Windows Firewall.
2. Disable it.
3. Now, check the Ethernet connection once again.

Reset the Network

You should pursue these steps provided below:

1. Reach the Settings screen, choose the ‘Network & Internet’ option, and then select the Status option.
2. Then find the option of ‘Network reset.’
3. Now, click on the button of ‘Reset now’ and hit the Yes button.

By following the troubleshooting tips mentioned above, you will be able to fix the ethernet connection issues on your Windows 10 device.

JEANNE E. WINFIELD arrived on the cyber security scene in the early 2000s when virus and malware were still new and slowly evolving. Her longtime affair with writing with an interest in the cybersecurity industry, combined with her IT degree, has contributed to experience several aspects of security suite industry such as blogging at mcafee.com/activate.

  Source : How to Fix Ethernet Connection Problems in Windows 10